ADONIS Microphone

■AM-308

*High-quality low-noise Mic. Amp built-in.

*Highly sensitive condenser microphone and flexible gooseneck employed.

*Voice quality selector switch for FM/SSB.

*Equipped with electronic touch switch for PTT operation.

( With LED TX indicator )

*Provided with UP and DOWN switches.

*Usable with microphone cable equipped with power feeding line ( ''D'' series cables).

*Connectable with every transceiver available in the market by the conversion cables (microphone interconnecting cables ) optionally available.

*Microphone : Wide-band Electret Condenser Mic. with IC Built-In.

*IC : 1 piece

*Transistor : 7 pieces

*Diode : 5 pieces

*Output Voltage : 0 - 30 mV ( RMS )

*Output Impedance : 500 - 100k ohms

*Power Voltage : DC 3 V ( UM 3 x 2 pcs. )

''D'' series Mic. Connecting Cord : DC 5 V - DC 9 V

*Power Consumption : 1.5 mA ( RX ) 2.5 mA ( TX )

*Dimensions ( mm ) : 100 (W) x 155 (D) x 310 (H)

*Weight : 450 g

PDF

■AM-508E

*High-quality Compressor Amp. built-in.

Capable of sending our constant voice level regardless of voice, whispering, loud, etc.

*Provided with High-sensitivity Electret Condenser Microphone.

The Electret Condenser Microphone ensure the better voice quality.

*Provided with FM/SSB Audio Quality Selector Switch.

*Provided with Electronic Switches.

*Usable with microphone cable equipped with power feeding line ( ''D'' series cables).

*Connectable with every transceiver available in the market by the conversion cables ( microphone interconnecting cables ) optionally available.

*Microphone : Electret Condenser Microphone

*IC : 1 piece

*Transceiver : 16 pieces

*Diode : 6 pieces

*Output Voltage : 0 - 30 mV ( RMS )

*Output Impedance : 500 - 100K ohms

*Compressor Level : 45dB ( HIGH ) 10dB ( LOW )

*Power Voltage : DC 3 V ( UM3 x 2 )

*Power Consumption : 2mA ( RX ) 3mA ( TX )

*Dimensions ( mm ) : 100 (W) x 155 (D) x 310 (H)

*Weight : 450 g

PDF

■AM-708E

*Selectable for 2 sets of transceivers at once by slide switch.

*High Sensitivity Electret Condenser Microphone Element equipped.

*High Quality Compressor Amplifier ( High - Low selectable ) built-in. It sends out always constant and optimum level

without distortion regardless of audio input level.

*Equipped with FM/SSB Audio Quality Selector Switch for optimum operation.

The Electret Condenser Microphone ensure the clearer voice quality in FM condition and ensure the better voice quality in the SSB condition.

*Non-Modulation Prevention Circuit built-in.

After continuous transmitting for a few minutes, the alarm circuit will be activated with alarm sound for 30 seconds.Then, the condition returns to receiving mode automatically.

*Battery-Check Circuit built-in.

Turn the power switch on ( by selecting ''FM' or ''SSB'' position ), and the level meter indicates the battery condition with power voltage for a few seconds.

*Connectable with the microphone interconnecting cable provided with power feeding line. ( ADONIS terminal arrangement indicates it as ''B'' in the center of connector.)

*Usable with microphone cable equipped with power feeding line ( ''D'' series cables ).

*You can choose the power source from dry batteries ( UM 3 x 2 ) or transceiver ( microphone connector DC 5 - 9V/

20mA minimum).